ตัวอย่าง Resume การบิน (Aviation) ฉบับที่ 143
Resume Example Aviation #0143 ประมาณ 1387 คำ
เรซูเม่ฉบับนี้เป็นตัวอย่างสำหรับตำแหน่ง Mechanic / Amentum - Fresno, CA มีประสบการณ์รวมประมาณ 6 ปี เรานำมาวิเคราะห์เพื่อให้เห็นว่า โครงสร้างมีจุดเด่นอย่างไร และส่วนใดนำไปปรับใช้กับข้อมูลของคุณได้
จุดเด่นของฉบับนี้ แสดงประสบการณ์ทำงาน 6 ตำแหน่ง พร้อมหน้าที่และผลงานของแต่ละช่วงอย่างเป็นลำดับ
สิ่งที่ควรสังเกตในตัวอย่างนี้
- ประวัติงานต่อเนื่อง 6 ปี เห็นการเติบโตของตำแหน่งได้ชัด
- ประสบการณ์ 6 ตำแหน่ง ไล่ระดับจาก Junior ขึ้นไปจนถึงตำแหน่งปัจจุบัน
- Professional Summary กระชับ ใช้คำที่สื่อความสามารถได้จริง
Professional Summary
Perceptive Aviation Electrician proficient at performing routine and non-routine inspections, and maintenance of avionic systems. Effectual at efficiently resolving electrical problems. Experienced working with electrical hand tools, soldering equipment, and test equipment. Collaborative and ready for a new position where avionics and electrical troubleshooting abilities can be properly utilized. Committed to ensuring all electrical systems of aircrafts are fully functioning. Knowledgeable of FCC and FAA rules and regulations. Dedicated to keeping aircraft electrical systems at peak performance. Proficient in testing, troubleshooting and diagnosing issues to determine best solutions. Keen eye for detail with organized approach and strong multitasking abilities. Well versed in handling and execution of a variety of tools. Knowledgeable in dealing with composites and carbon fiber. Exceptional and driven work ethic with strong communication and planning abilities.
Experience
Position
- Testing equipment use
- Scheduled Maintenance System components
- Root Cause Analysis
- Circuit wiring
- Schematics understanding
- Quality control
- Knowledge on composites
- Knowledge on carbon fiber
- Knowledge on usage of variety of tools
Mechanic / Amentum - Fresno, CA01/2022 - Current
- Inspected parts for proper machining finish and dimensions.
- Followed and adhered to quality and assembly standards.
- Worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
- Collaborated with team members to achieve target results.
- Demonstrated respect, friendliness and willingness to help wherever needed.
- Conducted research, gathered information from multiple sources and presented results.
- Operated machinery and tools safely during composite manufacturing.
- Sprayed chopped fiberglass, resins and catalysts onto prepared molds or dies, using pneumatic spray guns with chopper attachments.
- Released air bubbles and smoothed seams using rollers.
- Removed hulls and decks from molds.
- Used coordination and planning skills to achieve results according to schedule.
- Exceeded goals through effective task prioritization and great work.
- Ensure carbon fiber is up to standards without any delamination or tool marks.
- Replace composites or carbon fiber that does not meet standards.
- Verify all measurements are in tolerance up to the thousandths of an inch.
- Read and interpreted job orders, drawings and specification sketches.
- Assemble carbon fiber components with necessary tools (drills, guns, wrenches, sealant,etc)
- 1 month school of carbon fiber, composites, how to effectively use different tools, how to not damage parts of the airplane and or materials such as metals and composites.
- Proficient in structural rework of the airplane
Aviation Electrician09/2018 - 09/2021
Rocket Farm Restaurants
- Installed electrical and electronic components and assemblies.
- Conducted preventive maintenance and repairs on wire bundles, connectors, RF cables and fiber-optic lines for avionics and weapons integration lab equipment.
- Set up and operated precision test equipment for alignment, troubleshooting and testing of electrical equipment and systems.
- Laid out installation of aircraft systems following documentation such as wiring diagrams, blueprints, and manuals.
- Scheduled routine lab tests and coordinated assets per specific user requests in secure testing environment.
- Monitored parts department and placed orders for maintenance supplies on consistent basis.
- Maintained all aircraft in accordance with organizational maintenance requirements.
- Analyzed engineering drawings and schematics to troubleshoot systems and diagnose solutions.
- Used leveling compounds and scotch casts to seal parts, assemblies and sub-assemblies.
- Obtained fuel and oil samples to check for contamination.
- Completed preventive and reparative maintenance on aircraft electronics and computer systems.
- Performed aircraft corrosion control procedures, including washing, polishing and vacuuming.
- Conducted and oversaw safety protocols, including flight line foreign object prevention walks.
- Assisted with aircraft and equipment transport and movement.
- Operated power tools, gauges and testing equipment to adjust, repair and replace faulty components in aircrafts. Operated support equipment, including flight line vehicles, as needed.
- Completed all paperwork requirements for each task, including recording maintenance actions in aircraft logbooks.
- Performed aircraft maintenance for scheduled preventive actions and unscheduled requirements.
- Trained 8 new employees according to company standards.
- Achieved Plane Captain Qualification and NC10 powercart, Tow tractor, and move director licensing.
- Maintained orderly and safe work environment by enforcing tool control and FOD awareness, prevention and safety at all times.
- Do upkeep maintenence on carbon fiber.
- Change carbon fiber components when they're out of tolerance or does not meet regulations.
- Do corrosion prevention on metals and carbon fiber.
- Install new metal and carbon fiber parts on the jet
Plane Captain09/2018 - 09/2021
Red Lobster
- Performed fueling operations using gravity fill and closed circuit refueling methods.
- Operated ground support equipment, including electrical power supplies and engine starting units.
- Serviced aircraft fuel, oil, air, hydraulic and other systems to prepare flights for takeoff.
- Completed careful pre-flight checks and post-flight briefings to maintain safety standards.
- Performed accurate calculations of plane loads and fuel needs.
- Maintained compliance with MRC-200, MRC-100 and IETMS requirements for every flight.
- Completed more than 3,000 flight hours on deployment 2020-2021 Covid cruise on board the USS Nimitz, on FA-18 aircraft.
- Devoted special emphasis to punctuality and worked to maintain outstanding attendance record, consistently arriving to work ready to start immediately.
- Supervised work of contracted employees to keep on task for timely completion.
- Developed and implemented performance improvement strategies and plans to promote continuous improvement.
Bartender / Contracted - City, STATE04/2017 - 02/2018
- Designed special drink and cocktail offerings on monthly basis as part of seasonal offerings.
- Organized bar inventory and storage procedures to keep stock within optimal levels and meet expected customer demands.
- Developed new signature cocktails to support bar marketing brand and increase profits.
- Upsold menu items to customers, driving up per sale revenues and maximizing profits.
- Performed opening and closing duties, printing sales reports, setting up for incoming shift, preparing cash drawers and taking inventory.
- Upsold daily specials and beverage promotions to exceed daily sales goals.
- Managed bar inventory, restocked supplies and placed orders for spirits, beer, wines and mixers.
- Improved and applied social media marketing strategies to increase patronage.
- Conducted regular inventories of bar and drink supplies to keep stock on hand and avoid expensive rush orders.
- Boosted bar profitability, mentoring team members on routine procedures and productivity strategies.
- Adhered to state laws regarding alcoholic beverage services and customer regulations.
- Increased bar revenue through development and marketing of featured cocktails.
- Maintained secure cash drawers, promptly resolving discrepancies in daily totals.
- Kept bar presentable and well-stocked to meet all customer needs.
- Generated higher ticket averages by training employees on suggestive up-selling techniques.
Construction/roofing05/2014 - 06/2017
- Installed high-quality roofing systems, paying careful attention to hazards and other safety concerns.
- Inspected problem roofs to determine best repair procedures.
- Expanded knowledge of roofing materials, techniques and cost effectiveness.
- Installed, repaired, and replaced single-ply roofing systems.
- Effectively communicated with clients in person and through phone and email.
- Coordinated safety and construction equipment orders with purchasing manager.
- Eliminated barriers to productivity by interpreting for spanish-speaking workers and managers.
- Designated and managed material staging areas.
- Removed snow, water and debris from roofs prior to applying roofing materials.
- Conducted regular inspections and troubleshot building roofing systems for commercial and residential customers.
- Fastened composition shingles and sheets to roof with asphalt, cement and nails.
Education
- High School Diploma
- St. Cloud High School - Saint Cloud, FL
Skills
Strong communicationMilitary maintenance requirementsParts inspectionComponent examinationSafety-consciousPreventive MaintenanceElectrical equipment repair
สรุปว่าจะได้อะไรจากตัวอย่างนี้
ตัวอย่างนี้ช่วยให้เห็นแนวทางการเขียนเรซูเม่สำหรับตำแหน่ง Mechanic / Amentum - Fresno, CA ประสบการณ์ 6 ปี โดยเปิดด้วยบทสรุปที่บอกจุดเด่นของผู้สมัคร ตามด้วยประสบการณ์ทำงาน 6 ตำแหน่ง และข้อมูลการศึกษาที่จำเป็น พร้อมทักษะที่เกี่ยวข้องกับงาน คุณสามารถนำลำดับและวิธีนำเสนอไปปรับใช้ โดยเปลี่ยนรายละเอียดให้ตรงกับประสบการณ์จริงของคุณ
อย่างไรก็ตาม เรซูเม่ที่ชนะต้องเขียนให้ตรงตำแหน่งที่คุณสมัครโดยเฉพาะ ตัวอย่างนี้คือต้นแบบ ไม่ใช่สำเนา ทีมเรซูเม่ของเรารับเขียน Resume และ Cover Letter ภาษาอังกฤษให้โดดเด่นจากคู่แข่ง ส่งงานใน 2 วัน รับประกันความพึงพอใจ