ตัวอย่าง Resume วิศวกรรมไฟฟ้า (Electrical Engineering) ฉบับที่ 179
Resume Example Electrical Engineering #0179 ประมาณ 1194 คำ
เรซูเม่ฉบับนี้เป็นตัวอย่างสำหรับตำแหน่ง Instrument & Electrical Technician ระดับมืออาชีพ มีประสบการณ์รวมประมาณ 3 ปี เรานำมาวิเคราะห์เพื่อให้เห็นว่า โครงสร้างมีจุดเด่นอย่างไร และส่วนใดนำไปปรับใช้กับข้อมูลของคุณได้
จุดเด่นของฉบับนี้ แสดงประสบการณ์ทำงาน 4 ตำแหน่ง พร้อมหน้าที่และผลงานของแต่ละช่วงอย่างเป็นลำดับ
สิ่งที่ควรสังเกตในตัวอย่างนี้
- ประวัติงานต่อเนื่อง 3 ปี เห็นการเติบโตของตำแหน่งได้ชัด
- มีการกล่าวถึง SAP ซึ่งเป็นสิ่งที่ HR สายวิศวกรรมไฟฟ้า ให้ความสำคัญ
- ประสบการณ์ 4 ตำแหน่ง ไล่ระดับจาก Junior ขึ้นไปจนถึงตำแหน่งปัจจุบัน
- Professional Summary กระชับ ใช้คำที่สื่อความสามารถได้จริง
- มีทักษะแยกเป็นหมวด 13+ รายการ ให้ HR เห็นสเปกครบถ้วน
Professional Summary
Seeking a permanent position with a company that I am looking to grow and expand my knowledge as an Instrument/Electrical Technician that will utilize critical thinking, critical analysis, troubleshooting, industrial safety, and process of operations. Reliable worker with near perfect work attendance and safety record having never been injured on the job or audited by any safety technician for any type of violations. Critical and analytical minded with good decision making skills and "go-getter" work attitude. Accustomed to working in a team environment alongside other crafts such as Operations and Mechanical maintenance and with a strong will to learn and expand my knowledge of instrumentation and process equipment inside the chemical plant. Hoping to be a great asset to any team and to be a well-likable technician that is known to be a dynamic and hard worker within the company.
Experience
Instrument & Electrical Technician07/2019 - Current
Dow Chemical Company
- Troubleshooting, preventative maintenance of control valves, solenoids, transmitters, pH analyzer meters, sequence valves
- Instrument fitter experience with bending tubing, mounting transmitters, control valves, analyzers, bolting of flanges
- Self-motivated, self-starter, team player, excellent communication skills
- Can operate forklift, JLG lift
- Beginner/Competent in Instrumentation/ Process Beginner/ Competent in problem solving/troubleshooting/calibrations
- Performed and completed PM's, corrective maintenance, and assessments on various instrument and electrical equipment such
- as Pressure, Flow, and Temperature transmitters, Magnetic Flowmeters, Ultrasonic Meters, Motor-operated valves and actuators
- Calibrated and recorded "as found" and "as left" data on various transmitters and switches. (3-point calibrations)
- Operated equipment such as 787 Multimeter, 789 Processmeters, 475 Hart Communicator, flow simulators
- Wrote work orders, notifications on malfunctioning instrumentation and equipment
- Utilized SAP to search and order parts from vendors, created notifications, and searched up past work orders for reference when troubleshooting
- Utilized Microsoft Outlook for replying to emails from management or vendors
- Performed more than 150+ lockouts and tagouts of various electrical equipment
- Installed breakers, and performed cleanup inside of 480V switch racks
- Installation of network switches, small UPS supplies, and MQ controllers in DCS cabinets for the site Delta V system
- Megging of motors prior to startup of 4160V motors
- Troubleshoot, repaired, and wiring up of 480V motor-operated actuators
- Troubleshoot, repaired site lighting such as ballasts,LED bulbs, and fixtures
- Troubleshoot, repaired, or replaced security equipment for site such as security cameras, motion detector alarms, infrared and motion cameras
- Searched and interpreted instrument guidebooks and manuals when troubleshooting or installing new equipment
- Assisted operations and mechanical maintenance in various miscellaneous tasks
- Studied and interpreted instrument loop diagrams, wirings schematics and diagrams
- Picked up parts from site warehouse, and vendor locations
- Calibration and installation of pressure switches
- Fabrication of conduit, flex, tubing for various instrumentation and electrical equipment
Instrumentation Technician / Pfizer - Lima, OH10/2018 - Current
- Instrument Technician for Shintech Plant 1 Production
- Perform PM's and corrective maintenance on various instruments, analyzers, electrical equipment
- Pull, cleaning, calibration of pH Analyzer Transmitters
- Recorded calibration datas for transmitters
- Pressure, Temperature, Flow transmitter installations and bench/field calibrations and loop checks
- Troubleshoot and repairing of sequence valves, solenoids, and limit switches
- Assembly and building of a sequence valve such as tubing up the actuator, and limit switch and solenoid installation
- Calibration of pressure switches and temperature switches with use of pressure calibrators and temperature baths
- Pull, cleaning, replacing of Turbidity meters
- LEL meter maintenance and calibrations
- Tubing bending and install on control valves and pumps
- Equipment (positioner) install and calibration on control valves
- Level switch checking on liquid process pits that contained caustic, slurry
- Assist engineers, other instrument techs in projects
- Stroke checks, repairing of various parts of a control valve
- Reported all unsafe activities
- Maintained a perfect safety record
- Installed electrical and mechanical equipment according to electric code
- Worked overtime including holidays and weekends several times
- Maintained a working area that was clean and safe
- Interpreted wiring schematics and diagrams
- Inspected equipment after working to check proper working capabilities
- Calibrated and tested instrumentation in the field and shop
Instrument and Electrical Apprentice03/2017 - 10/2018
Ace Hardware
- Measured, cut, and bended conduit using various equipment and hand tools
- Measure, cut and fab supports needed for conduit routings
- Determine correct wire size, and pull needed length through conduit for instrument/equipment
- Terminations of motor junction boxes in field
- Terminations of FJB boxes
- Installed new electrical components such as transmitters, ABV/EBV valves, solenoids, analyzers and terminate them
- Mount GC8000/TDLS220/TDLS8000s analyzers and pull power and signal wire for them
- Tested wiring and other system parts for electrical flow and function
- Maintained work areas in a clean, neat and organized fashions
- Followed direction of master/journeyman electrical professionals to complete tasks in a safe, accurate and efficient manner
- Had a basic understanding of wiring diagrams and wiring schematics for instruments and analyzers being worked on
- Understanding of P&ID's on a schematic
- Replace any damaged tubing, faulty electrical systems with new ones
- Gathered material, supplies, and needed tools in preparation for each workday or new job
- Follow block PPE in various chemical plant units and wear correct PPE at all times
- Follow all electrical codes, handbooks
- When working in Dow blocks, fill out correct paperwork, Red Tag Master, block sign in sheets
Lawn & Garden Sales Associate / Wal-mart Stores Inc. - City, STATE03/2016 - 03/2017
- Assist in customers needs in finding products/items
- Maintained positive relationships with all customers
- Followed standards and procedures to maintain safe work environment
- Watered and nurtured plants to keep intact for selling
- Count and stack inventory
- Organize and keep products in order according to shelf
- Check out customers at check out line
- Bag groceries, lawn & garden items for customers
- Assemble barbecue pits, and other equipment for customers
- Provided outstanding customer service
- Unpacked and assembled all new merchandise using variety of power tools
- Put up and organize products according to season of the year
Education
- High School Diploma: 2016
- Angleton High School - Angleton, TX
- Associate of Applied Science: Instrumentation Technology, 2018
- Brazosport College - Lake Jackson, TX · Dean's List for Fall 2018 Semester · 00GPA · Graduated December 2018 · State Certified Apprentice Electrician License
- HazMat Certification
- Forklift/JLG Airlift Certification
- Instrumentation Certification
Skills
TREX Emerson communicatorpressure calibratorsP&ID'sterminationsmegging motorsvoltage testinggroundinglightingbasic hand toolsbandsawdrillMicrosoft WordMicrosoft PowerPoint
สรุปว่าจะได้อะไรจากตัวอย่างนี้
ตัวอย่างนี้ช่วยให้เห็นแนวทางการเขียนเรซูเม่สำหรับตำแหน่ง Instrument & Electrical Technician ประสบการณ์ 3 ปี โดยเปิดด้วยบทสรุปที่บอกจุดเด่นของผู้สมัคร ตามด้วยประสบการณ์ทำงาน 4 ตำแหน่ง และข้อมูลการศึกษาที่จำเป็น พร้อมทักษะที่เกี่ยวข้องกับงาน คุณสามารถนำลำดับและวิธีนำเสนอไปปรับใช้ โดยเปลี่ยนรายละเอียดให้ตรงกับประสบการณ์จริงของคุณ
อย่างไรก็ตาม เรซูเม่ที่ชนะต้องเขียนให้ตรงตำแหน่งที่คุณสมัครโดยเฉพาะ ตัวอย่างนี้คือต้นแบบ ไม่ใช่สำเนา ทีมเรซูเม่ของเรารับเขียน Resume และ Cover Letter ภาษาอังกฤษให้โดดเด่นจากคู่แข่ง ส่งงานใน 2 วัน รับประกันความพึงพอใจ