ตัวอย่าง Resume วิศวกรเครื่องกล (Mechanical Engineer) ฉบับที่ 259
Resume Example Mechanical Engineer #0259 ประมาณ 901 คำ
เรซูเม่ฉบับนี้เป็นตัวอย่างสำหรับตำแหน่ง Mechanical Engineer 10/2013 - 03/2016 ระดับมืออาชีพ มีประสบการณ์รวมประมาณ 5 ปี เรานำมาวิเคราะห์เพื่อให้เห็นว่า โครงสร้างมีจุดเด่นอย่างไร และส่วนใดนำไปปรับใช้กับข้อมูลของคุณได้
จุดเด่นของฉบับนี้ แสดงประสบการณ์ทำงาน 3 ตำแหน่ง พร้อมหน้าที่และผลงานของแต่ละช่วงอย่างเป็นลำดับ
สิ่งที่ควรสังเกตในตัวอย่างนี้
- ประวัติงานต่อเนื่อง 5 ปี เห็นการเติบโตของตำแหน่งได้ชัด
- มีการกล่าวถึง SAP ซึ่งเป็นสิ่งที่ HR สายวิศวกรเครื่องกล ให้ความสำคัญ
- ประสบการณ์ 3 ตำแหน่ง ไล่ระดับจาก Junior ขึ้นไปจนถึงตำแหน่งปัจจุบัน
- Professional Summary กระชับ ใช้คำที่สื่อความสามารถได้จริง
Professional Summary
Mechanical Engineer with eight years of experience in the Oil and Gas industry. I have held positions of increasing responsibility involving designing, manufacturing, testing and operating of equipment. I have conducted presentations to customers ranging from sharing the knowledge regarding how equipment works to providing solutions that impact their operations. I have significant international experience having been based in both Moscow and Kuala Lumpur. My organization included four engineers and ten field specialists who managed various sites. Was responsible for reviewing all technical submissions from customers and selecting equipment that offered the best solution towards If equipment failed to operate properly I conducted a FMEA investigation into what caused the failure. Customers with unique and extreme environmental demands would require confirmation that the equipment they used would hold up to the rigors of their location. In these instances we would develop a test program to certify the equipment to their specific requirements. Was responsible for the design and development of any test fixtures, test procedures, and design reviews to ensure the test met all customer requirements. achieving their goals. Conducted a Critical Well Review for all new equipment in the region.
Experience
Mechanical Engineer 10/2013 - 03/2016
Tlc Engineering For Architecture
- with eight years of experience in the Oil and Gas industry.
- I have held positions of increasing responsibility involving designing, manufacturing, testing and operating of equipment.
- I have conducted presentations to customers ranging from sharing the knowledge regarding how equipment works to t works to providing solutions that impact their operations.
- I have significant international I experience having been based in both Moscow and Kuala Lumpur. - My organization included four engineers and ten field specialists who managed various sites. Was responsible for reviewing all technical submissions from customers and selecting equipment that offered the best solution towards achieving their goals.
- Conducted a Critical Well Review for all new equipment in the region.
- If equipment failed to operate properly I conducted FMEA investigation into what caused the failure.
- Customers with unique and extreme environmental demands would require confirmation that the equipment they used would hold up to the rigors of their location.
- In these instances we would develop a test program to certify the equipment to their specific requirements.
- Was responsible for the design and development of any test fixtures, test procedures, and design reviews to ensure the test met all customer requirements.
Senior Technical Professional - Completions Tools
- Assist the field with all inquiries pertaining to Horizontal Completions and RapidFrac systems. Responsibilities included: Writing and reviewing procedures Standardizing procedures for field locations Customers Supported: Lukoil, ExxonMobil, SPD, Rosneft, Gazpromneft Conducting root cause analysis into problematic equipment Developed and mentored a team that followed processes and procedures to minimize our Cost of Poor Quality foot print Continually improved our Safety awareness at job sites Performed Torque and Drag analysis for all completions Supported business development in obtaining quotes for equipment and proposals to clients clients Conducted cted training courses with clients on selected equipment Incorporated best practices and lessons learned into the development of trainees Conducted 5$ inspections when visiting locations Conducted Critical Well Reviews on all new development projects Presented technical presentations to customers on potential new equipment for their wells Conducted testing for Dissolvable Ball products for SPD and Gazpromneft Halliburton, Malaysia, Kuala Lumpur.
NA Technical Professional - Completions Tools
- Support for Exxon Mobil oil platforms Reviewing completion schematics for the Exxon Mobil Assembled data sheets consisting of critical OD's, ID's, and lengths of all tools Developed Design of Service plans for all systems ranging from single completion, dual completions, single zone FRAC and dual zone FRAC packs Tracked equipment from manufacturing to delivery at the base Coordinated with personnel in the workshop to assemble all necessary equipment in a timely and efficient manner to meet the deadline requirements of the customer Organized personnel movement between jobs in direct contact with the customer to answer all technical questions and coordinate equipment load out.
- Generated costing sheet for each completed job Organized all relevant correspondence and technical information with Halliburton once job was completed Technical Professional-Mechanical Sand Control Tools Technology Key requirements for this position included utilizing problem solving skills, time-management (working on several high priority projects at a time), attention to detail (generating accurate Bill of Materials, prints, and 3D models of both component parts and assemblies), and teamwork.
- Team lead in conducting high level detail design reviews for both Shell and BP. Supported functions to manufacturing department providing oversight to personnel through product feasibility studies on parts production, and validation of assembly to ensure form, fit, and function are not compromised.
- Ensured quality control through setup, testing, and validation to qualify tools for API/ISO certification. Customization Department For each project completed the following processes Thread compatibility Burst Tensile Collapse Temperature De-Ration FEA Analysis 3-D Solidworks Models Technical Drawings BOM's created Development Department Generated Project plans Budget Designed test fixtures Created test layouts Performed calculations regarding Burst, Tensile, etc. Conducted design reviews Interpreted results Standardized test Setup and Report format.
Education
- University of Colorado
- Bachelor of Science: Mechanical Engineering · Mechanical Engineering
Skills
SAP SoftwareSolidWorksTime Management
สรุปว่าจะได้อะไรจากตัวอย่างนี้
ตัวอย่างนี้ช่วยให้เห็นแนวทางการเขียนเรซูเม่สำหรับตำแหน่ง Mechanical Engineer 10/2013 - 03/2016 ประสบการณ์ 5 ปี โดยเปิดด้วยบทสรุปที่บอกจุดเด่นของผู้สมัคร ตามด้วยประสบการณ์ทำงาน 3 ตำแหน่ง และข้อมูลการศึกษาที่จำเป็น พร้อมทักษะที่เกี่ยวข้องกับงาน คุณสามารถนำลำดับและวิธีนำเสนอไปปรับใช้ โดยเปลี่ยนรายละเอียดให้ตรงกับประสบการณ์จริงของคุณ
อย่างไรก็ตาม เรซูเม่ที่ชนะต้องเขียนให้ตรงตำแหน่งที่คุณสมัครโดยเฉพาะ ตัวอย่างนี้คือต้นแบบ ไม่ใช่สำเนา ทีมเรซูเม่ของเรารับเขียน Resume และ Cover Letter ภาษาอังกฤษให้โดดเด่นจากคู่แข่ง ส่งงานใน 2 วัน รับประกันความพึงพอใจ